 |
 |

 |
fnncvnqj |
 |
 |
aoi electronics |
|

(It will expand, if * picture is clicked.)

Floating point operation
SFACS (sampling frequency optimization)
Dolby bus management
Programmable bikewaddo filter
Dynamic range compression function
Advanced auto myuyo Control
Headphone amplifier built-in
Output: 6ch+AUX 2ch
Use : home theater etc.
64P TQFP package |
 |
|
(It will expand, if * picture is clicked.)

Main input: 2ch I2S / SPDIF *
Main output: 3ch PWM
Floating point movement
SFACS (sampling frequency optimization)
External memory I/F for delay control
Adapted type gain control of oneself
5 band graphic equalizer
3D SARAUNDO
Programmable bikewaddo filter
S/N ratio 100db
Use : digital TV etc.
64P TQFP package |
 |
|
(It will expand, if * picture is clicked.)

Input: 2ch I2S (digital) *
Output: 30Wx2 or 15Wx2ch+ 30Wx1ch
Asynchronous SRC built-in
Floating point movement
3D SARAUNDO
Adaptation type gain control for ILC
Dynamic range control
The graphic equalizer in which composition change is possible
(Seven bands, five bands, tone control)
Five bikewaddo filter built-in per output
S/N ratio 100db
Use : digital TV etc.
56P QFN package |
 |
|
(It will expand, if * picture is clicked.)

Perfect digital amplifier chain
the object for speakers -- output 2ch 500mW
the object for headphone -- output 2ch 50mW and with virtual GND
ADC for analog input
ASRC processing digital input: Frequency of 8-96kHz
Preceding paragraph floating point processing DSP loading :
-rbikewaddo filter
-RF noise filter
-3D SARAUNDO
-5 band graphic equalizer (others))
FIRUTARESU reproduction
PSRR function
36P CSP package |
 |
|
(It will expand, if * picture is clicked.)

Input: 6ch I2S Digital (32kHz - 48kHz)
Output: 6ch PWM
Preceding paragraph processing function
- 8 band graphic equalizer
-3D SARAUNDO
-Digital volume control
(-127db range 0.5db step)
PWM conversion
3.3V single I/O power supply
48P TQFP Package |
 |
|
(It will expand, if * picture is clicked.)

2ch PWM input
Main force: 50W 6Άx2 (BTL) or 25Wx4 (SE)
The self-PUROTETO design by the error report function
(OTP, OCP, UVP)
Efficient power stage (90% or more)
Error return function
(Automatic [ with NSP series ], or programmable return)
Voltage regulator built-in for internal gate drive supply
Dynamic range 96db
56P TSSOP package |
 |
|

2.1ch
ADC built-in |

8ch + AUX 8ch
Sound place processor built-in
SDRAM I/F Loading |
|



output |
model |
Function
|
8ch |
MBI5167 |
8ch (8 bits) Constant current driver
The stable constant current output hardly influenced by the voltage variation of load
Power supply voltage 3.3V/5V correspondence
Constant current output range: |
3`45mA @VDD=5V
3`30mA @VDD=3.3V |
Output current error: |
It is }3% between Ch
Between IC individuals }6% |
Resistance with outside adjusts output current |
The measure against ECM by a time lag output |
Clock of operation: |
25MHz |
Lead Flea, the package corresponding to RoHS |
MBI5168 |
8ch (8 bits) Constant current driver
Power supply voltage 5V
The stable constant current output hardly influenced by the voltage variation of load
Output current error: |
It is }3% between Ch
Between IC individuals }6% |
Constant current output range : |
5`120mA |
Resistance with outside adjusts output current |
High-speed response of an output: |
/OE (min.) 200S @IOUT60mA
/OE (min.) 400nS @IOUT = 60`100mA |
Clock of operation: |
25MHz |
A lead freelancer, the package corresponding to RoHS |
MBI5169 |
8ch (8 bits) Constant current driver
Realization of the optional feature by share I/O: |
A normal mode and LED failure detection mode |
The stable constant current output hardly influenced by the voltage variation of load |
Power supply voltage 5V |
Output current error: |
It is }3% between Ch
Between IC individuals }6% |
Constant current output range: |
5`120mA |
Resistance with outside adjusts output current |
High-speed response of an output: |
/OE (min.) 200S @IOUT60mA
/OE (min.) 400nS @IOUT = 60`100mA |
Clock of operation: |
25MHz |
Lead Flea, the package corresponding to RoHS |
MBI5170 |
8ch (8 bits) Constant current driver
Realization of the optional feature by share I/O: |
A normal mode and 128 steps Output current adjustment mode: |
The stable constant current output hardly influenced by the voltage variation of load |
Power supply voltage 5V |
Output current error: |
It is }3% between Ch
Between IC individuals }6% |
Constant current output range: |
5`120mA |
Resistance with outside adjusts output current. |
High-speed response of an output: |
/OE (min.) 200S @IOUT60mA
/OE (min.) 400nS @IOUT = 60`100mA |
Clock of operation: |
25MHz |
A lead freelancer, the package corresponding to RoHS |
MBI5171 |
8ch (8 bits) Constant current driver
Realization of the optional feature by share I/O: |
A normal mode and LED failure detection mode
128 steps Output current adjustment mode |
The stable constant current output hardly influenced by the voltage variation of load |
Power supply voltage 5V |
Output current error: |
It is }3% between Ch
Between IC individuals }6% |
Constant current output range: |
5`120mA |
Resistance with outside adjusts output current |
Constant current output range: |
/OE (min.) 200S @IOUT60mA
/OE (min.) 400nS @IOUT = 60`100mA |
Clock of operation: |
25MHz |
ELead Flea, the package corresponding to RoHS |
|


output |
model |
Function |
16ch |
MBI5025 |
16ch (16 bits) Constant current driver
The stable constant current output hardly influenced by the voltage variation of load
Power supply voltage 3.3V/5V correspondence
Constant current output range: |
3`45mA @VDD=5V
3`30mA @VDD=3.3V |
Output current error |
It is }3% between Ch
Between IC individuals }6% |
Resistance with outside adjusts output current |
High-speed response of an output: |
/OE (min.) 250S @VDD = 5.0V |
The measure against ECM by a time lag output |
Clock of operation: |
25MHz |
Lead Flea, the package corresponding to RoHS |
MBI5026 |
16ch (16 bits) Constant current driver
Power supply voltage 5V
The stable constant current output hardly influenced by the voltage variation of load
Output current error |
It is }3% between Ch
Between IC individuals }6% |
Constant current output range: |
5`90mA |
Resistance with outside adjusts output current. |
High-speed response of an output: |
/OE (min.) 200S |
Clock of operation: |
25MHz |
Schmidt Trigger input
A lead freelancer, package corresponding to RoHS
|
MBI5027 |
16ch (16 bits) Constant current driver
E |
Realization of the optional feature by share I/O: |
A normal mode and LED failure detection mode |
The stable constant current output hardly influenced by the voltage variation of load |
Power supply voltage 5V |
Output current error: |
It is }3% between Ch
Between IC individuals }6% |
Constant current output range: |
5`90mA |
Resistance with outside adjusts output current |
High-speed response of an output: |
/OE (min.) 200S |
Clock of operation: |
25MHz |
Schmidt Trigger input
A lead freelancer, the package corresponding to RoHS |
MBI5028 |
16ch (16bit) 16ch (16 bits) Constant current driver
Realization of the optional feature by share I/O: |
A normal mode and LED failure detection mode
128 steps Output current adjustment mode |
The stable constant current output hardly influenced by voltage change of load |
Power supply voltage 5V |
Output current error: |
It is }3% between Ch
Between IC individuals }6% |
Constant current output range: |
5`90mA |
Resistance with outside adjusts output current |
High-speed response of an output |
/OE (min.) 200S |
Clock of operation |
25MHz |
Schmidt Trigger inputbr>
Lead Flea, the package corresponding to RoHS |
MBI5029 |
16ch (16 bits) Constant current driver
Realization of the optional feature by share I/O: |
Normal mode
LED failure detection mode
128 steps Output current adjustment mode |
The stable constant current output hardly influenced by the voltage variation of load |
Power supply voltage 5V |
Output current error |
It is }3% between Ch
Between IC individuals }6% |
Constant current output range |
5`120mA |
Resistance with outside adjusts output current |
High-speed response of an output |
/OE (min.) 200S |
ock of operation |
25MHz |
Schmidt Trigger input
A lead freelancer, the package corresponding to RoHS |
|


output |
model |
Function |
16ch PWM |
MBI5030 |
16ch (16 bits) PWM (Power Width Mdulation) Constant current LED driver
16 bits / 12 bits Gray scale PWM control
With the SUKURAMBURUDO PWM (S-PWM) technology of MACROBLOCK original, a refresh rate is improved dramatically
LED failure (open) detection function built-in
8 bits Programmable output current regulating-function
Overheat warning function
The noise control function by the output delay at the time of all-points light
The stable constant current output hardly influenced by the voltage variation of load
Output current error: |
It is }3% between Ch
It is }6% between IC individuals |
Power supply voltage 3.0V-5.5V |
Constant current output range: |
5`60mA @VDD=5V
5`45mA @VDD=3.3V |
Clock of operation: |
25MHz |
Schmidt Trigger input
Lead Flea, the package corresponding to RoHS |
MBI5031 |
The Schlink version products of MBI5130
12 bits Gray scale PWM control
All of other functions and performance are the same as MBI5030
|
|


output |
model |
Function |
1 |
MBI1801 |
Constant current driver IC only for high power LED
Constant current output 1.2A (Max) x 1
The stable constant current output which is not influenced by change of input voltage or load voltage
LED load voltage : up to 17V
Thermal protection built-in
Output current adjustment by external resistance
ON-OFF from the exterior and luminosity control are possible
Power-supply-voltage 5.0}0.5V
A lead freelancer, the package corresponding to RoHS |
2 |
MBI1802 |
Only for high power LED 2ch constant current driver IC
Constant current output 360mA (Max) x 2
The stable constant current output which is not influenced by change of input voltage or load voltage
LED load voltage : up to 17V
Thermal protection and a warning flag function
Output current adjustment by external resistance
ON-OFF from the exterior and luminosity control are possible
The Schmidt Trigger input correspondence
Power-supply-voltage 5.0}0.5V
Lead Flea, the package corresponding to RoHS |
4 |
MBI1804 |
Only for high power LED 4ch constant current driver IC
Constant current output 240mA (Max) x 4
It was influenced by change of load voltage, twisted and was stabilized. Constant current output
LED load voltage : up to 17V
Output current error: |
It is }3% between Ch
Between IC individuals }6% |
Output current adjustment by external resistance
The Schmidt Trigger input correspondence
Power-supply-voltage 5.0}0.5V
Lead Flea, the package corresponding to RoHS |
16 |
MBI1816 |
16ch constant current LED driver IC
Stable constant current which does not receive influence in change of load voltage
LED load voltage : up to 17V
Output current error: |
It is }3% between Ch
Between IC individuals }6% |
Output current adjustment by external resistance
Constant current output range: 5 - 60 mA/ch
The Schmidt Trigger input correspondence
Power-supply-voltage 5.0}0.5V
Lead Flea, the package corresponding to RoHS |
|


output |
model |
Function |
3 |
MBI6010 |
For RGB clusters 3ch output constant current LED driver
Stable constant current which does not receive influence in change of load voltage
Voltage regulator built-in:Voltage range 5.5V-12V
LED load voltage: Up to 17V
Constant current output range:5 - 60 mA/ch
Signal regeneration function built-in: |
It is necessary to insert neither a buffer nor amplifier for degradation of the signal by cable transmission in the middle of restoration and a cascade.
Cable transmission distance 2m or more, 250 or more cascade connection of a cluster. |
Output current error: |
It is }5% between Chbr>
Between IC individuals }6% |
5MHz (cable length 2m) of clock frequencies
|
|
|